• Products
  • Filament
  • Accessories
  • Software
  • MakerWorld
  • Explore
  • Support
Bambu Lab H2C - Technical Specifications
Printing Technology

Fused Deposition Modeling

Body
Build Volume (W*D*H)Single Nozzle Printing: 325*320*320 mm³ (Left)
Single Nozzle Printing: 305*320*325 mm³ (Right)
Dual Nozzle Printing: 300*320*325 mm³
Total Volume for Two Nozzles: 330*320*325 mm³
ChassisAluminum and Steel
Outer FramePlastic and Glass
Physical Dimensions
Physical Dimensions492*514*626 mm³
Net Weight32.5 kg
Toolhead
Extruder GearHardened Steel
NozzleHardened Steel
Max Nozzle Temperature350 °C
Supported Nozzle Diameter0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament CutterBuilt-in
Filament Diameter1.75 mm
Extruder MotorBambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed
Build Plate MaterialFlexible Steel Plate
Included Build Plate TypeTextured PEI Plate
Supported Build Plate TypeTextured PEI plate, Engineering Plate
Max Heatbed Temperature120 °C
Speed
Max Speed of Toolhead1000 mm/s
Max Acceleration of Toolhead20,000 mm/s²
Max Flow for Hotend40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Chamber Temperature Control
Active Chamber HeatingSupported
Max Temperature65 °C
Air Purification
Pre-filter GradeG3
HEPA Filter GradeH12
Activated Carbon Filter TypeGranulated Coconut Shell
VOC FiltrationSuperior
Particulate Matter FiltrationSupported
Cooling
Part Cooling FanClosed Loop Control
Cooling Fan for HotendClosed Loop Control
Main Control Board FanClosed Loop Control
Chamber Exhaust FanClosed Loop Control
Chamber Heat Circulation FanClosed Loop Control
Auxiliary Part Cooling FanClosed Loop Control
Toolhead Enhanced Cooling FanClosed Loop Control
Supported Filament Type

PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS;Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS

Sensor
Live View CameraBuilt-in; 1920*1080
Nozzle CameraBuilt-in; 1920*1080
BirdsEye CameraBuilt-in; 3264*2448 (Equipped with Laser Edition)
Toolhead CameraBuilt-in; 1600*1200
Door SensorSupported
Filament Run Out SensorSupported
Filament Tangle SensorSupported
Filament OdometrySupported with AMS
Power Loss RecoverySupported
Electrical Requirements
Voltage100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power*1800 W@220 V/1250 W@110 V
Typical Power200 W@220 V/200 W@110 V (Single Nozzle Printing PLA)
Working Temperature

10 °C-30 °C

Electronics
Touchscreen5-inch 720*1280 Touchscreen
StorageBuilt-in 8 GB EMMC and USB Port
Control InterfaceTouchscreen, mobile App, PC App
Motion ControllerDual-core Cortex-M4 and Single-core Cortex-M7
Application ProcessorQuad-core ARM with NPU
Software
SlicerBambu StudioSupports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating SystemMacOS, Windows, Linux
Network Control
EthernetNot Available
Wireless NetworkWi-Fi
Network Kill SwitchNot Available
Removable Network ModuleNot Available
802.1X Network Access ControlNot Available
Wi-Fi
Operating Frequency2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP)2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi ProtocolIEEE 802.11 a/b/g/n
Be the first to receive our latest product updates, newest offerings, and free product trials.
Products
3D PrintersFilamentAccessoriesMaker's SupplySpare Parts
Software
Bambu StudioBambu HandyBambu SuiteSystem Status
Support
Support CenterBambu Lab AcademyFilament GuideOfficial Wiki
Community
MakerWorldFacebook GroupRedditForumDiscord
Company
About UsBlogContact UsCareersTrust Center
Cooperation
Authorized ResellerPartner with Us
 GlobalEnglish
Privacy Notice
Terms of Use
Warranty
Cookie Policy
Cookie Settings
Copyright © 2026 Bambu Lab All Rights Reserved.